Commercial bifold install

Finished Product, Work in progress

This morning, we had 3 bifolds up and screwed in by 9:30am.

I’ve come back to the factory to relax and do this post, whilst the lads struggle on and do the finishing touches. Monday we glaze them.

Here is our job site. timber posts between bifolds.

Getting the first bifold moved into position

3 bifolds secured in (more screws later) by 930am. Glazing will occur monday with 6.38 clear laminate glass.

Advertisements

Timber bi-folds and french door installation

Finished Product

We made 2 bifolds, and 2 doorframes with doubledoors (french doors) for this job at west lakes. the original windows were removed, and some required wall cuts too.

Client will render to the outside of our frames.

original timber windows.

 

 

 

If you need the supply and installation of windows and doors, give us a call or email and we are more than happy to quote.

CONTACT PAGE

 

Bifold install

Finished Product

We were asked to assess a damaged Bifold that had its active panel ripped off in a windy storm.

p8290011

This Bifold had its active panel ripped off in a storm.

p8290012

this is the panel that was pulled off in the wind.

p8290015

You can see some of the damage to the hinges.

 

 

 

 

 

 

 

 

 

 

 

 

 

The doors,hinges, perimeter jambs and head, and the seals were all damaged in the storm. only a new bifold would be appropriate, repair was out of the question.

 

20170212_115255

all loaded up the sunday afternoon before the install.

20170213_141525

Clear anodise 5 panel bifold door. Hawkesbury suite from ALSPEC.

20170213_141544

Work done.

Back for 2017

Finished Product, Work in progress

Well we have come back (the 9th for George and I with the rest of the staff fully back on january 23rd 2017).  I’ve been a little slack in uploading new images of what we have been doing so today here are a few random images of what has been going on the past few months.

 

Replacing damaged colonial bars with new ones.

5 panel clear anodise bifold door.  Hawkesbury suite from ALSPEC.

5 panel clear anodise bifold door. Hawkesbury suite from ALSPEC.

Casement windows with putty glazed sashes.

Casement windows with putty glazed sashes.

Hanging the cedar gate we had made earlier

Hanging the cedar gate we had made earlier

cedar doorframe

cedar doorframe, made to clients specs.

removal of old timber lift up window, replaced with aluminium double slider

removal of old timber lift up window, replaced with aluminium double slider

Pearl White Aluminium Sliding Window. A common but great style of window we make. Cathedral glass

Cedar Doorframes, no sills.

Cedar Doorframes, no sills.

A small selection of the variety of work we have carried out recently. Ill try make a better effort and post more frequently.

regards Peter @ THE WINDOW MAN

Office partitons

Work in progress
Clear anodise office partitions

Clear anodise office partitions

Spent a few days installing office partitions, doors, glass and locks on various floors of a franklin st building in adelaide’s CBD. we re-used some glass panels, and some doors, with the rest being manufactured in our factory and then installed on site.

a WIP photo.

Very hard work with most items requiring transport up staircases.or lifts.

Commercial framing with hinged door

Work in progress

 

Its nearing the end of the year and we have been flat out trying to get all our work done before the xmas break. Its so busy ive had no time to upload new photos recently, but here is a job we were on yesterday.

Clear Anodise series 400 commercial framing with hinged door.

Clear Anodise series 400 commercial framing with hinged door.

This job now needs to be glazed, and we have windows on the second floor as well.

Mill aluminium ready for powdercoater

Work in progress
Mill (raw) aluminium, ready for delivery to the powdercoater for painting as "NOTRE DAME "

Mill (raw) aluminium, ready for delivery to the powdercoater for painting as “NOTRE DAME “

 

This is what windows and doors look like after being cut, docked, machined from the raw extrusions. next stop the powdercoater to paint them – in this case a colour called NOTRE DAME will be used. then we get the painted extrusions back, check they are ok and then assemble them ready for the next step after that – glazing.